Adhesive
Adhesive bonds solid or engineered hardwood flooring to strong, sound dry substrate. Using high quality adhesive offers the most secure fitting option.
Download Brochure2 products
FAQs
Adhesive
How much floor adhesive do I need?
The amount of floor adhesive required depends on the size of the area being covered and the specific product's coverage rate. The coverage rate is typically indicated on the adhesive packaging and is measured in square feet or square metres per gallon or litre.
To calculate the amount of adhesive required, measure the total square footage or square metres of the area to be covered and divide it by the adhesive's coverage rate. It is recommended to purchase slightly more adhesive than the calculated amount to account for any waste or additional needs during installation.
How to apply floor adhesive
The process of applying floor adhesive may vary depending on the specific adhesive and the type of flooring being installed. However, here are some general guidelines:
- Make sure the subfloor is clean, dry, and free from debris or dust
- Always check and follow the adhesive manufacturer's instructions and guidelines
- Apply the adhesive evenly to the subfloor using a recommended tool
- Follow any specific instructions for open time (how long the adhesive needs to set before installing flooring)
- Lay your flooring planks onto the adhesive, pressing it firmly
- Use appropriate tools like a roller or mallet to get rid of any air pockets
- If you spill or splatter any adhesive, remove it immediately with a recommended solvent
- Allow the adhesive to dry and cure fully before walking on the floor or adding furniture
How thick should floor adhesive be?
The thickness of floor adhesive depends on the manufacturer's recommendations and the specific type of flooring material being installed. Building up adhesive thickness is typically achieved by using the appropriate trowel or notched spreader, which determines the amount of adhesive applied. It is crucial to follow the adhesive manufacturer's instructions for proper application and thickness to ensure effective bonding between the subfloor and the flooring material.
What adhesive should I use for wood flooring?
The type of adhesive recommended for wood flooring depends on the specific type of flooring, subfloor, and installation method in question. For solid wood or engineered wood flooring, polyurethane or modified silicone adhesives are commonly used. However, it is important to consult the flooring manufacturer's recommendations and follow the adhesive manufacturer's instructions to ensure compatibility and proper adhesion. Contact our sales team to ask about suitable adhesive.
Can I apply adhesive directly to the wood flooring planks?
In most cases, adhesive should be applied to the subfloor rather than directly onto the wood flooring planks. This allows for a more secure bond between the subfloor and the flooring itself.
However, certain adhesive products may have specific instructions that allow for direct application to the backside of the wood flooring planks. It is important to refer to the adhesive manufacturer's recommendations for the correct application method.
How long does floor adhesive take to dry?
The drying time for floor adhesive can vary depending on factors such as the type of adhesive, the ambient temperature of the room, humidity levels, and the thickness of the adhesive layer. It is essential to refer to the adhesive manufacturer's instructions for specific drying and curing times.
In general, some adhesives may dry within hours, while others may require 24-48 hours or more to fully cure. It is important to avoid walking on the floor until the adhesive is fully cured to ensure proper bonding and durability.
Is floor adhesive waterproof?
The level of waterproof protection offered by the floor adhesive depends on the specific product. Some adhesives are designed to provide water resistance or waterproofing properties. Make sure to check the adhesive manufacturer's specifications and product information to find out if the adhesive is suitable for areas where moisture or water exposure may occur.
For wet or high-moisture areas, like bathrooms, basements or kitchens, specialised waterproof adhesives or moisture-resistant options are available and should be used to keep your floor in the best condition.
Can I remove and replace wood flooring if it has been glued down?
Removing glued-down wooden flooring can be challenging and may cause damage to the subfloor or the planks themselves. However, it is possible for a flooring professional to remove and replace glued-down flooring with the right techniques and tools. It is essential to hire a professional flooring contractor who has experience in removing glued-down flooring to minimise any risks of damage to the flooring.
Categories
Explore our exceptional flooring collections, categorised to easily find the floor you are looking for.
Engineered Hardwood Flooring
Engineered wood flooring offers the same sophistication of a solid wood floor, while using smaller amounts of eco-precious hardwoods and benefiting from added practicality. Suitable for use with underfloor heating, our precision engineered flooring boards deliver on style, with exceptional quality, stability and performance.
View All Products Request a BrochureShop By Collection
Solid Hardwood Flooring
For some, there's nothing quite so authentic as a solid natural block or plank floor. Our solid timber floors are a statement of quality, which goes back to Atkinson & Kirby's roots in 1903. Whilst the format is steeped in tradition, the character you can give a space with solid wood is as varied as the tonal richness of wood itself.
View All Products Request a BrochureShop By Collection
Flooring Accessories
A range of flooring accessories, from underlay to skirting, designed to keep your floor in pristine condition.
View All Products Request a Brochure